Brass Washers - Cable Glands Asia

Application

Features and Benefits

Washers are standard washers used for general-purpose fastening.
They are placed under the head of a bolt or above a nut to distribute clamping force and prevent fasteners from pulling through materials.
Washers are used to provide a bearing surface to minimize surface wear.
They also evenly distribute a fastener’s load to minimize surface deformation from fastener tightening or can cover large clearance holes.
Good electrical conductivity (26% of copper).
Good heat conductivity (70 BTU/hr/ft2/°F/ft.).
Spring temper provides a flatter part and a cleaner cut than half hard or soft tempered.

Material

Free Cutting Brass

Thickness

0.03mm-1.0mm

Tolerance

+/-0.03 or according to customer

Shape

Flat, Round, Square or any as per custom design available.

Standard

ISO, GB, DIN, JIS, ANSI, BSW, DIN

Heat Treatment

Tempering, Hardening, Spheroidizing, Stress Relieving.