Brass Screw In Anchors

Screw In Anchors



High Carbon Steel

Corrosion Protection

Zinc Plating, Mechanical Galvanising

Head Styles

Flanged Hex

Fixing Method

Through Fixture

Setting Method


Anchoring Method

Thread Forming

Drilled Hole Diameters

5mm, 6mm, 8mm, 10mm, 12mm

Anchor Lengths

30mm, 50mm, 60mm, 75mm, 100mm, 150mm

Maximum Fixture Thickness

5mm, 10mm, 15mm, 20mm, 25mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 90mm, 100mm

Indicative Working Loads in 32MPa Concrete
  • Max Tensile 1.4kN -14.4kN
  • Max Shear 1.5kN - 16.7kN

Concrete, Solid Brick, Solid Block, Hollow Block, Hollow Slab, Hollow Brick

Features and Benefits

  • Screw-In Anchor is a totally removable, medium duty, rotation setting, thread forming anchor, ideal for either temporary or permanent anchoring into substrates such as concrete, brick, hollow brick or block.
  • Screw-In Anchor is both fast and easy to install as it simply screws into a pre-drilled hole.
  • It is even faster and easier to remove. It simply screws out leaving an empty hole with no protruding metal parts to grind off.
  • Ideal for close-to-edge and close-to-anchor installation as its self-tapping, rotation setting method of installation is not subject to any expansion pressure, therefore does not burst the substrate.
Anchor Size Hole Ø (mm) Embedment Depth (mm)) Min Edge Distance (mm) Min Anchor Spacing (mm) Max Tensile Load, Na (KN)* Max Shear Load, Va (KN)*
5 25 15 15 1.4 1.5
6 45 25 50 4.1 4.5
8 60 35 70 6.6 8.4
10 75 40 80 9.8 13.8
12 90 50 100 14.4 16.7
16 120 160 100 23.1 26.6
We can manufacture and export Brass Screw In Anchors as per specifications (custom drawing and samples) for more information please Contact Us